- First Name
- Antonio
- Joined
- Jul 21, 2022
- Threads
- 24
- Messages
- 1,041
- Reaction score
- 1,539
- Location
- Virginia
- Website
- youtube.com
- Vehicle(s)
- 2022 XL Ford Maverick
- Engine
- 2.0L EcoBoost
- Thread starter
- #1
Will need to enable Heated steering wheel with Forscan. I will Post tomorrow the captures screen of the process . i hope this help feel free to ask any question if needed.
Parts Needed for heated Steering wheel
Ford Escape or Maverick that comes with heated wheel .
Steering Control module theres 3 diffrent ones for the Ford Maverick you will need to buy the one thats its on back order lol . i could not wait so i bought the one with lane assist.
Part number for Steering Control Module with clock spring . NZ6Z-3F791-DA WITH LANE ASSIST '''
Connector for Steering Control Module for power and Fuse
C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404
Terminal for wire harness from steering control module to lower floor connector.
DU2Z-14474-DA part number for terminal that goes to footwell
Heres some pictures of the procces of steering wheel removal. Make sure disconnect the negative battery terminal before messing with air bags.
Ok Heated conversion wiring diagram time !!
as you can see the 22 XL doesnt come with this connector.
C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404
So this wires one needs to go under the floor circuit 160 pin 2 wich its power from fuse box wire its Yellow Green .
Pin 1 its just Ground theres a area next to the instrument cluster where you can install it and theres one next to the dashboard chassis on the driver side.
Heres and example on where to harness will be installed behind the steering wheel control module.
You will need to install a terminal on the female side connector on the bottom of the foot rest pad. its the one that says 3873 on the picture below.
it will be Pin 38 on the bottom connector.
PART NUMER OF TERMINAL THAT WILL BE NEEDED TO INSTALL ON CONECTOR I FOUND DU2Z-14474-DA .
DIAGRAM IM USING FOR HEATED STEERING WHEEL
Good news for anyone that has an XL version of our truck all you need its the Steering Control Module and add the harness that i made and enable it with forscan. The Steering Control Module comes with the Clockspring and switches. The one i was looking for with out the lane keep avoidence switch was on back order so i got this one and works great. Heres some pictures i will move them around later in order.
Parts Needed for heated Steering wheel
Ford Escape or Maverick that comes with heated wheel .
Steering Control module theres 3 diffrent ones for the Ford Maverick you will need to buy the one thats its on back order lol . i could not wait so i bought the one with lane assist.
Part number for Steering Control Module with clock spring . NZ6Z-3F791-DA WITH LANE ASSIST '''
Connector for Steering Control Module for power and Fuse
C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404
Terminal for wire harness from steering control module to lower floor connector.
DU2Z-14474-DA part number for terminal that goes to footwell
Heres some pictures of the procces of steering wheel removal. Make sure disconnect the negative battery terminal before messing with air bags.
Ok Heated conversion wiring diagram time !!
as you can see the 22 XL doesnt come with this connector.
C226B THATS THE CONECTOR NUMBER
PART NUMBER ITS 3U2Z-14S411-CAA WPT - 404
So this wires one needs to go under the floor circuit 160 pin 2 wich its power from fuse box wire its Yellow Green .
Pin 1 its just Ground theres a area next to the instrument cluster where you can install it and theres one next to the dashboard chassis on the driver side.
Heres and example on where to harness will be installed behind the steering wheel control module.
You will need to install a terminal on the female side connector on the bottom of the foot rest pad. its the one that says 3873 on the picture below.
it will be Pin 38 on the bottom connector.
PART NUMER OF TERMINAL THAT WILL BE NEEDED TO INSTALL ON CONECTOR I FOUND DU2Z-14474-DA .
DIAGRAM IM USING FOR HEATED STEERING WHEEL
Good news for anyone that has an XL version of our truck all you need its the Steering Control Module and add the harness that i made and enable it with forscan. The Steering Control Module comes with the Clockspring and switches. The one i was looking for with out the lane keep avoidence switch was on back order so i got this one and works great. Heres some pictures i will move them around later in order.
Sponsored
Last edited: